Eurocom D40EV IMPRESSA User Manual download pdf (Page 39)

Troubleshooting - 33

Concise User’s Guide

English

Unwelcome numbers appear

when typing.

For Model A only - If the LED is lit, then Number Lock is turned ON. Press and release the

Fn + NumLk key combination (see “Numeric Keypad” on page 11).

The Wireless LAN or Bluetooth

module cannot be detected/

configured.

The ON/OFF switch has not been switched ON. Make sure you have set the ON/OFF

switch to ON in order to enable the module.

The ON/OFF switch has been switched ON, but you have both the Wireless LAN and

Bluetooth modules in your computer. Use the Fn + F12 key combination to toggle power to the

modules. DO NOT enable power and attempt to use both modules at the same time as this may

cause a conflict.

The driver(s) for the module(s) has (have) not been installed. Make sure you have installed the

driver for the appropriate module.

The system sees the card reader

as a disk drive, and automatically

defines it as drive “C:”.

If you are installing an operating system (e.g. Windows XP), make sure to set the USB Host

Controller option in the BIOS to “Disabled”. This will disable all the USB ports. This will also

prevent the system from seeing the card reader as a disk drive. Don’t forget to enable the USB

ports after installing the operating system.

Problem Possible Cause - Solution

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 205 206

No comments

Eurocom D40EV IMPRESSA User Manual Page 39