Eurocom M590K EMPEROR User Manual download pdf (Page 96)

Upgrading The Computer

6 - 8 Upgrading the System Memory (RAM)

5. The RAM module will pop-up, and you can remove it.

6. Pull the latches to release the second module if necessary.

7. Insert a new module holding it at about a 30° angle and fit the connectors firmly

into the memory socket.

8. The module’s pin alignment will allow it to only fit one way. Make sure the module

is seated as far into the socket as it will go. DO NOT FORCE the module; it should

fit without much pressure.

9. Press the module in and down towards the mainboard until the socket levers click

into place to secure the module.

10. Replace the cover and screws (see Figure 6 - 4).

11. Restart the computer to allow the BIOS will register the new memory configuration

as it starts up.

Figure 6 - 7

RAM Removal

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 153 154

No comments

Eurocom M590K EMPEROR User Manual Page 96