Eurocom D900T PHANTOM User Manual download pdf (Page 108)

Upgrading The Computer

6 - 4 Upgrading the Hard Disk Drive(s)

Upgrading the Hard Disk Drive(s)

The hard disk drive(s) can be taken out to accommodate other 2.5" IDE hard

disk drives with a height of 9.5mm (h) (see “Storage Options” on page D -

4). Follow your operating system’s installation instructions, and install all

necessary drivers and utilities (as outlined in“Drivers & Utilities” on page 4

- 1), when setting up a new hard disk.



HDD System

Warning

New HDD’s are blank.

Before you begin make

sure:

You have backed up any

data you want to keep

from your old HDD.

You have all the CD-

ROMs and FDDs re-

quired to install your oper-

ating system and

programs.

If you have access to the

internet, download the lat-

est application and hard-

ware driver updates for

the operating system you

plan to install. Copy these

to a removable medium.



Jumper Settings for Two Parallel ATA Hard Disks

If you are using Parallel ATA (PATA) hard disk drives. then set the jumper on the

Slave hard disk to the Cable Select option in order for the system to recognize the

disks (see your hard disk manual or the information printed on the hard disk itself

for details on the jumper settings). The Slave disk will automatically be in the upper

slot of the hard disk bracket, the Master will be in the lower slot (as defined by the

hard disk cable).

If want to setup your hard disk(s) in RAID mode, configure RAID mode according

to the instructions in Chapter 4:“RAID Mode Configuration” on page 4 - 6.

If want to setup your hard disk(s) in ATA mode, configure ATA Mode according to

the instructions in Chapter 4:“ATA Mode Configuration” on page 4 - 2.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 181 182

No comments

Eurocom D900T PHANTOM User Manual Page 108