Eurocom D900T PHANTOM User Manual download pdf (Page 112)

Upgrading The Computer

6 - 8 Upgrading the System Memory (RAM)

3. Gently pull the two release latches ( & ) on the sides of the memory

socket in the direction indicated by the arrows in Figure 6 - 5.

4. The RAM module will pop-up, and you can remove it.

5. Pull the latches to release the second module if necessary.

6. Insert a new module holding it at about a 30° angle and fit the connectors

firmly into the memory slot.

7. The module’s pin alignment will allow it to only fit one way. Make sure the

module is seated as far into the slot as it will go. DO NOT FORCE the

module; it should fit without much pressure.

8. Press the module in and down towards the mainboard until the slot levers

click into place to secure the module.

9. Replace the memory socket cover and the 4 screws (see Figure 6 - 4).

10. Restart the computer to allow the BIOS will register the new memory

configuration as it starts up.

6 7

8 8

Figure 6 - 5

RAM Module

Removal

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 181 182

No comments

Eurocom D900T PHANTOM User Manual Page 112